Welcome to USAFishBox! You are currently viewing the forum as a guest. To view the index and portal you must be a member. Please click the register button to join NOW for FREE.!..Finally check out the 24 hour live chat !!!


USA Fishbox is THE place where fish freaks come together. Here at USA we talk aquatics all day long. If you are new please sign up and join in.
facebookForumHomeLog inRegisterFAQ
Welcome to USA Fishbox. If you are a guest please sign up. This forum is 100% free to use.


 getting those corals to pop!

Go down 

Posts : 1453
Location : Md
Favorite Fish: : Maroon clownfish,Tangs,bluespot jaw fish,Bangaii,Mandarins etc.......I love all fish really.

getting those corals to pop! Empty
PostSubject: getting those corals to pop!   getting those corals to pop! Icon_minitime7/6/2011, 9:13 am

I Found this on another Site and thought it would be good to put here for people struggling with their colors on certain corals. This is word for word from another reefer so feel free to add anything or make and statements based on the information below.

This guide endeavors to assist you with the ever popular SPS coral. it explains specific ideas and strategies in which you can do to affect the color of your corals. This assumes you have a more then basic understanding of water parameters in your tank.

In the past I have been asked a lot about coral colorization as well as wanted to satisfy my own curiosity about specific methods to achieving certain colors. Usually I am asked, How do you get good colors? Which I then ask, what specific color are you looking to enhance? Over the past several months I have really worked on tweaking colors and what is needed to get certain colors. I have done my own testing as well as seen a lot of others tanks and what they have done to achieve certain colors. I think I finally have a basic map for those who are interested.
Please note: I am assuming that you meet the minimum suggested standards to keeping SPS; strong lighting, calcium at the appropriate levels, strong skimming and live rock, high flow.

Highly dependent on Nitrate and PO4 levels. Of course all SPS colors are highly dependent on lack of N and P so I wanted to start with probably the easiest color to get, yellow. Yellows are sort of you baseline; yellows will tell you a lot about what is going on in your tank, what is needed and what is overdosed. Nitrate and/or PO4 reduction is most important, either through technical means such as nitrate/phosphate reducers or biologically through DSB, Carbon dosing and/or water changes and fuges. Basically, if you want to do SPS, I would suggest starting with an acropora that is yellow. If you can get it to say yellow for several months, you should be ready for something else.

Greens would be the next easiest color to tweak. Most green coloration can be achieved through the addition of an Iron Concentrate (Kents is what I use, however Iron is Iron). You must be very careful with Iron because it is also an Algae accelerator; this is why it is so important for you to get your yellows colors first (your N and P will be lowered).
Additionally, I use my yellows as indicators for my greens and blues. You’ll notice a deficiancy if your greens are brown color or they are paling in color. I start off by dosing Iron at about 1 drop per 50 usg twice a week and take note of what happens, color changes, Algae growth, until my yellow acroporas display a green shimmer (it won’t be a solid green but a shimmer of a green/yellow).
Please note, a sign of overdosing is a darkening of tissue, when this happens you have added too much iron or too much iron is being added. Another sign of overdosing is Algae growth, stop immediately and possibly do a water change if necessary. Like everything else reef, go slowly.

Blues and some purples
This is mainly for blues but I have found is can also have an effect on purples. The supplement for this is Potassium Iodide Concentrate or Lugol’s solution, ESV Potassium Iodide Concentrate will also work; don’t just get something that says Potassium because that is a little different. Dosing should be done when blue colors become less intense. Again, using yellow corals as indicators, stop dosing when yellow corals display a green shimmer.

Reds/Pinks and some Purples
Primarily for coloring reds and pinks in Montiporas, Pocilloporas, Birdsnest, other Stys and Seriatoporas. The supplement is Potassium (not potassium iodide). If you are using a high potassium salt mix such as Oceanic, Tropical Marine Pro and you are doing regular water changes, you are more than likely not going to need to supplement this much.
For dosing you can use your monitporas, especially caps as indicators. Supplementing is required when Montiporas display slower growth and appear washed out to grey appearance. Indicators on Stys and Pocs are when they look like they have been exposed to air. Polyps are completely withdrawn and colors are light. Other indicators of potassium deficiency is when the pinks turn into a light brown and when acroporas loose their color and get lighter and pale. A major potassium deficiency is seen when tissue is lost, mostly starting from the base opposed to spotting (patchy look). And overdose can lead to tip burning so don’t mistake tip burn for new growth. Tips burns will be white with no polyps.

Probably one of the hardest coloration of all acroporas from my experience since it is a combination of several variables.
First and foremost is water clarity, which means Carbon and/or filter socks. I have also had good result from biological filters such as using cryptic zones, which produce seasquirts, sponges and other filter feeding animals. Zeo Sponge Power, which can be used in any system, feeds sponges. Sponges are great because they can filter a mass amount of water for better water clarity.
From what I have noted, increased water clarify will first effect SPS tips but not the complete base. I have seen nana and valida with really nice purple tips but brown/tan/white bases. I have seen the same nana and valida in another’s tanks, which met all other parameters with a full purple from base to tip.
Second being lighting. From my observations of my own tank and others, purples seem to love 420-440nm range light spectrum, those found in actinics and 20K halides. Some of the best purples I have seen are in tanks that have 440nm blue actinics (ATI Blue+, Giessman Actinic) or 20K Halides (Radium, XM 20K).
Third, supplements such as Iodide and Potassium (see blues and Reds/Pinks). Again, make sure your greens are green and yellows are yellow. Your blue should be bright with depth. Iodide will also help if you have tip burn.
These are just my observations through testing and I am sure in the future other factors will be seen and added. Please feel free to comment with your own observations, data is very important to moving forward.


<*)))>{ <*)))>{ <*)))>{ <*)))>{
180 gallon mixed reef SPS dominant 75 gallon sump/fuge.
40 gallon anemone/softy tank 20 gallon sump/fuge.
Red sea max 250 Seahorse tank.
Silence is Golden but Duct tape is Silver.....
Having a saltwater tank without coral is like the Hells angels riding Mopeds*************************************
"The road to success is always under construction."
Back to top Go down
getting those corals to pop!
Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
UsaFishBox :: :: SaltWater Aquaria :: Corals-
Jump to: